01
Base prep and a firm check
The base is shaped, compacted, and proved over the sand and limestone so the slab spreads its weight flat and stays put once loaded, any soft spot found before the pour.
Proof
A job we'd put our name on
A pad cut to whatever rests on it and built for the ground below: carried on structural fiber and welded wire mesh for the load, set on a base proved firm over sand and limestone, and drained so summer runoff leaves it be.
Credibility comes from how it's built, not from promises. Here's the order of operations on every concrete pads & slabs job.
The base is shaped, compacted, and proved over the sand and limestone so the slab spreads its weight flat and stays put once loaded, any soft spot found before the pour.
Slab depth tracks what sits on it. A shed pad and a workshop floor under gear are separate builds, not one thickness scaled up or down.
Most pads run on structural fiber and welded wire mesh, the warm-climate build. Rebar enters only for a genuinely heavy or structural load, the job it exists for, not a light residential pad.
Enclosed or conditioned slabs get a vapor barrier against ground moisture, and the surroundings are graded so summer water sheds instead of soaking the base.
The mix is placed, control joints cut, and the slab cured with Gainesville's heat and humidity in mind so it sets evenly across the pour.
Most contractors vanish after the deposit. We pick up the phone, show up when we say, and stand behind the work after the truck leaves. The follow-through is the difference.
A foreman we know runs your job and a vetted crew does the work, managed by Lucky's, one company accountable from the first call to the final walkthrough.
COI and lien waivers on file before we break ground. The documentation that lets commercial clients pay and gives homeowners peace of mind.
Prepped subgrade, reinforced and mixed to spec for the job, and proper curing. We build credibility through the process, not promises. On concrete pads & slabs, that starts with base prep and a firm check.
Pads price to the load and the ground: reinforcement to the use, a base proved and compacted over sand and limestone, and a grade that sheds water. Most pads open from $7 to $13 per square foot, with thickness and any vapor barrier moving it. We size and price to what the pad will carry.
Most residential pads use structural fiber through the batch and welded wire mesh across the slab. When the load turns heavy or structural, a workshop floor that parks vehicles say, rebar goes in, since that is the weight rebar handles. Steel is matched to the load, not packed into a light pad.
Depth follows the load. A shed pad holds a fraction of what a garage or workshop floor under vehicles must, so thickness and reinforcement match the real use, with the sand and limestone below accounted for.
Yes. Each is a heavy, concentrated load, so thickness and reinforcement step up and rebar goes where the load earns it. Anything heavy also wants a base proved firm over the sandy soil so it will not shift. Send the specs and the pad is built to them.
For an enclosed or conditioned slab, usually, since ground moisture pushes up through concrete. It depends on how the slab will be used.
Some do, by size, placement, and use, through the City of Gainesville and Alachua County. When one looks likely we say so early, before it surfaces mid-job.
You'll hear back from a real person, usually the same day. No call center, no runaround, no chasing us down.
Booking up fast this season. Or call (352) 758-8153